diff --git a/flake.nix b/flake.nix
index 91296db..6f780ab 100644
--- a/flake.nix
+++ b/flake.nix
@@ -82,6 +82,14 @@
           ./homes/floppydisk
         ];
       };
+      "floppydisk@nixpad" = home-manager.lib.homeManagerConfiguration {
+        pkgs = nixpkgs.legacyPackages.x86_64-linux; # Home-manager requires 'pkgs' instance
+        extraSpecialArgs = {inherit inputs outputs;};
+        modules = [
+          # > Our main home-manager configuration file <
+          ./homes/floppydisk
+        ];
+      };
     };
   };
 }
diff --git a/hosts/default.nix b/hosts/default.nix
index 36a8b85..e12b1f6 100644
--- a/hosts/default.nix
+++ b/hosts/default.nix
@@ -20,4 +20,16 @@ in {
       homes
     ];
   };
+
+  nixpad = nixpkgs.lib.nixosSystem {
+    specialArgs = {inherit inputs outputs;};
+    modules = [
+      # this list defines which files will be imported to be used as "modules" in the system config
+      ./nixpad/configuration.nix
+
+      # use the nixos-module for home-manager
+      home-manager
+      homes
+    ];
+  };
 }
diff --git a/hosts/nixpad/configuration.nix b/hosts/nixpad/configuration.nix
new file mode 100644
index 0000000..2c34f19
--- /dev/null
+++ b/hosts/nixpad/configuration.nix
@@ -0,0 +1,149 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{
+  config,
+  pkgs,
+  ...
+}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+  boot.loader.efi.efiSysMountPoint = "/boot/efi";
+
+  networking.hostName = "nixpad"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "Europe/London";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_GB.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_GB.UTF-8";
+    LC_IDENTIFICATION = "en_GB.UTF-8";
+    LC_MEASUREMENT = "en_GB.UTF-8";
+    LC_MONETARY = "en_GB.UTF-8";
+    LC_NAME = "en_GB.UTF-8";
+    LC_NUMERIC = "en_GB.UTF-8";
+    LC_PAPER = "en_GB.UTF-8";
+    LC_TELEPHONE = "en_GB.UTF-8";
+    LC_TIME = "en_GB.UTF-8";
+  };
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+
+  # Enable the KDE Plasma Desktop Environment.
+  services.xserver.displayManager.sddm.enable = true;
+  services.xserver.desktopManager.plasma5.enable = true;
+
+  # Configure keymap in X11
+  services.xserver = {
+    layout = "us";
+    xkbVariant = "";
+  };
+
+  # Enable experimental features
+  nix.settings.extra-experimental-features = ["flakes" "nix-command"];
+
+  # Enable CUPS to print documents.
+  services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  sound.enable = true;
+  hardware.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  services.xserver.videoDrivers = ["intel"];
+  hardware.opengl.driSupport32Bit = true;
+
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.floppydisk = {
+    isNormalUser = true;
+    description = "Frankie B.";
+    extraGroups = [ "networkmanager" "wheel" ];
+    packages = with pkgs; [
+      firefox
+      kate
+    ];
+    initialPassword = "changeme";
+    shell = pkgs.fish;
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    wget
+    git
+    gnupg
+    pinentry
+    nerdfonts
+    jetbrains-mono
+    kitty
+  ];
+
+  programs.fish.enable = true;
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  programs.gnupg.agent = {
+    enable = true;
+    enableSSHSupport = true;
+  };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "22.11"; # Did you read the comment?
+
+}
diff --git a/hosts/nixpad/hardware-configuration.nix b/hosts/nixpad/hardware-configuration.nix
new file mode 100644
index 0000000..e326b0c
--- /dev/null
+++ b/hosts/nixpad/hardware-configuration.nix
@@ -0,0 +1,40 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ehci_pci" "ata_piix" "usb_storage" "sd_mod" "sdhci_pci" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/79fd353d-4e05-44fd-9e10-e57b08c140f0";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot/efi" =
+    { device = "/dev/disk/by-uuid/AA53-B6CE";
+      fsType = "vfat";
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/92e64b37-f558-4333-bfb0-0e4bfe6e91c0"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s25.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp3s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}