Merge bf54ca3cb2 into c6453c4e69

docs/manual/configuring/custom-plugins.md

@@ -20,7 +20,6 @@ custom plugins that you might have added to your configuration.
 
 ```{=include=} sections
 custom-plugins/configuring.md
-custom-plugins/lazy-method.md
+custom-plugins/new-method.md
-custom-plugins/non-lazy-method.md
+custom-plugins/old-method.md
-custom-plugins/legacy-method.md
 ```

docs/manual/configuring/custom-plugins/configuring.md

@@ -1,32 +1,12 @@
 # Configuring {#sec-configuring-plugins}
 
-Just making the plugin to your Neovim configuration available might not always be enough. In that
+Just making the plugin to your Neovim configuration available might not always
-case, you can write custom lua config using either `config.vim.lazy.plugins.*.setupOpts`
+be enough. In that case, you can write custom lua config using either
-`config.vim.extraPlugins.*.setup` or `config.vim.luaConfigRC`. 
+`config.vim.extraPlugins` (which has the `setup` field) or
-
+`config.vim.luaConfigRC`. The first option uses an attribute set, which maps DAG
-The first option uses an extended version of `lz.n`'s PluginSpec. `setupModule` and `setupOpt` can
+section names to a custom type, which has the fields `package`, `after`,
-be used if the plugin uses a `require('module').setup(...)` pattern. Otherwise, the `before` and
+`setup`. They allow you to set the package of the plugin, the sections its setup
-`after` hooks should do what you need.
+code should be after (note that the `extraPlugins` option has its own DAG
-
-```nix
-{
-  config.vim.lazy.plugins = {
-    aerial-nvim = {
-      # ^^^^^^^^^ this name should match the package.pname or package.name
-      package = aerial-nvim;
-
-      setupModule = "aerial";
-      setupOpts = {option_name = false;};
-
-      after = "print('aerial loaded')";
-    };
-  };
-}
-```
-
-The second option uses an attribute set, which maps DAG section names to a custom type, which has
-the fields `package`, `after`, `setup`. They allow you to set the package of the plugin, the
-sections its setup code should be after (note that the `extraPlugins` option has its own DAG
 scope), and the its setup code respectively. For example:
 
 ```nix
@@ -44,7 +24,7 @@ config.vim.extraPlugins = with pkgs.vimPlugins; {
 }
 ```
 
-The third option also uses an attribute set, but this one is resolved as a DAG
+The second option also uses an attribute set, but this one is resolved as a DAG
 directly. The attribute names denote the section names, and the values lua code.
 For example:
 

docs/manual/configuring/custom-plugins/lazy-method.md

@@ -1,40 +0,0 @@
-# Lazy Method {#sec-lazy-method}
-
-As of version **0.7**, we exposed an API for configuring lazy-loaded plugins via
-`lz.n` and `lzn-auto-require`.
-
-```nix
-{
-  config.vim.lazy.plugins = {
-    aerial = {
-      package = pkgs.vimPlugins.aerial-nvim;
-      setupModule = aerial;
-      setupOpts = {
-        option_name = true;
-      };
-      after = ''
-        -- custom lua code to run after plugin is loaded
-        print('aerial loaded')
-      '';
-
-      # Explicitly mark plugin as lazy. You don't need this if you define one of
-      # the trigger "events" below
-      lazy = true;
-
-      # load on command
-      cmd = ["AerialOpen"];
-
-      # load on event
-      event = ["BufEnter"];
-
-      # load on keymap
-      keys = [
-        {
-          key = "<leader>a";
-          action = ":AerialToggle<CR>";
-        }
-      ];
-    };
-  };
-}
-```

docs/manual/configuring/custom-plugins/new-method.md

@@ -1,4 +1,4 @@
-# Non-lazy Method {#sec-non-lazy-method}
+# New Method {#sec-new-method}
 
 As of version **0.5**, we have a more extensive API for configuring plugins,
 under `vim.extraPlugins`. Instead of using DAGs exposed by the library, you may

docs/manual/configuring/custom-plugins/old-method.md

@@ -1,4 +1,4 @@
-# Legacy Method {#sec-legacy-method}
+# Old Method {#sec-old-method}
 
 Prior to version 0.5, the method of adding new plugins was adding the plugin
 package to `vim.startPlugins` and add its configuration as a DAG under one of

docs/manual/configuring/dag-entries.md

@@ -12,9 +12,9 @@ entries in nvf:
 2. `globalsScript` - used to set globals defined in `vim.globals`
 3. `basic` - used to set basic configuration options
 4. `optionsScript` - used to set options defined in `vim.o`
-5. `theme` (this is simply placed before `pluginConfigs` and `lazyConfigs`, meaning that
+5. `theme` (this is simply placed before `pluginConfigs`, meaning that
-   surrounding entries don't depend on it) - used to set up the theme, which has to be done before
+   surrounding entries don't depend on it) - used to set up the theme, which has
-   other plugins
+   to be done before other plugins
 6. `lazyConfigs` - `lz.n` and `lzn-auto-require` configs. If `vim.lazy.enable`
    is false, this will contain each plugin's config instead.
 7. `pluginConfigs` - the result of the nested `vim.pluginRC` (internal option,

modules/plugins/comments/comment-nvim/config.nix

@@ -11,6 +11,8 @@
   inherit (self.options.vim.comments.comment-nvim) mappings;
 in {
   config = mkIf cfg.enable {
+    vim.startPlugins = ["comment-nvim"];
+
     vim.lazy.plugins.comment-nvim = {
       package = "comment-nvim";
       setupModule = "Comment";

modules/plugins/completion/nvim-cmp/config.nix

@@ -41,13 +41,13 @@ in {
             package = "nvim-cmp";
             after = ''
               ${optionalString luasnipEnable "local luasnip = require('luasnip')"}
+                  require("lz.n").trigger_load("cmp-path")
               local cmp = require("cmp")
               cmp.setup(${toLuaObject cfg.setupOpts})
 
-              ${optionalString config.vim.lazy.enable
+              ${concatStringsSep "\n" (map
-                (concatStringsSep "\n" (map
                 (package: "require('lz.n').trigger_load(${toLuaObject (getPluginName package)})")
-                  cfg.sourcePlugins))}
+                cfg.sourcePlugins)}
             '';
 
             event = ["InsertEnter" "CmdlineEnter"];
@@ -74,9 +74,10 @@ in {
           };
 
           formatting.format = cfg.format;
+        };
 
         # `cmp` and `luasnip` are defined above, in the `nvim-cmp` section
-          mapping = {
+        setupOpts.mapping = {
           ${mappings.complete} = mkLuaInline "cmp.mapping.complete()";
           ${mappings.close} = mkLuaInline "cmp.mapping.abort()";
           ${mappings.scrollDocsUp} = mkLuaInline "cmp.mapping.scroll_docs(-4)";
@@ -121,5 +122,4 @@ in {
       };
     };
   };
-  };
 }

modules/plugins/lsp/config.nix

@@ -116,60 +116,7 @@ in {
         end
 
         local capabilities = vim.lsp.protocol.make_client_capabilities()
-        ${optionalString usingNvimCmp ''
+        -- ${optionalString usingNvimCmp "capabilities = require('cmp_nvim_lsp').default_capabilities()"}
-          -- HACK: copied from cmp-nvim-lsp. If we ever lazy load lspconfig we
-          -- should re-evaluate whether we can just use `default_capabilities`
-          capabilities = {
-            textDocument = {
-              completion = {
-                dynamicRegistration = false,
-                completionItem = {
-                  snippetSupport = true,
-                  commitCharactersSupport = true,
-                  deprecatedSupport = true,
-                  preselectSupport = true,
-                  tagSupport = {
-                    valueSet = {
-                      1, -- Deprecated
-                    }
-                  },
-                  insertReplaceSupport = true,
-                  resolveSupport = {
-                    properties = {
-                      "documentation",
-                      "detail",
-                      "additionalTextEdits",
-                      "sortText",
-                      "filterText",
-                      "insertText",
-                      "textEdit",
-                      "insertTextFormat",
-                      "insertTextMode",
-                    },
-                  },
-                  insertTextModeSupport = {
-                    valueSet = {
-                      1, -- asIs
-                      2, -- adjustIndentation
-                    }
-                  },
-                  labelDetailsSupport = true,
-                },
-                contextSupport = true,
-                insertTextMode = 1,
-                completionList = {
-                  itemDefaults = {
-                    'commitCharacters',
-                    'editRange',
-                    'insertTextFormat',
-                    'insertTextMode',
-                    'data',
-                  }
-                }
-              },
-            },
-          }
-        ''}
       '';
     };
   };

modules/plugins/theme/theme.nix

@@ -66,7 +66,7 @@ in {
   config = mkIf cfg.enable {
     vim = {
       startPlugins = [cfg.name];
-      luaConfigRC.theme = entryBefore ["pluginConfigs" "lazyConfigs"] ''
+      luaConfigRC.theme = entryBefore ["pluginConfigs"] ''
         ${cfg.extraConfig}
         ${supportedThemes.${cfg.name}.setup {inherit (cfg) style transparent base16-colors;}}
       '';

modules/plugins/treesitter/config.nix

@@ -11,6 +11,7 @@
   inherit (lib.nvim.dag) entryBefore entryAfter;
 
   cfg = config.vim.treesitter;
+  usingNvimCmp = config.vim.autocomplete.nvim-cmp.enable;
 
   self = import ./treesitter.nix {inherit pkgs lib;};
   mappingDefinitions = self.options.vim.treesitter.mappings;
@@ -20,6 +21,17 @@ in {
     vim = {
       startPlugins = ["nvim-treesitter"];
 
+      lazy.plugins = {
+        cmp-treesitter = mkIf usingNvimCmp {
+          package = "cmp-treesitter";
+          after = ''
+            local path = vim.fn.globpath(vim.o.packpath, 'pack/*/opt/cmp-treesitter')
+            require("rtp_nvim").source_after_plugin_dir(path)
+          '';
+        };
+        nvim-cmp.after = mkIf usingNvimCmp "require('lz.n').trigger_load('cmp-treesitter')";
+      };
+
       autocomplete.nvim-cmp = {
         sources = {treesitter = "[Treesitter]";};
         sourcePlugins = ["cmp-treesitter"];