Merge 5987b911e8 into 383924d225

docs/manual/configuring/custom-plugins/configuring.md

@@ -1,12 +1,13 @@
 # Configuring {#sec-configuring-plugins}
 
-Just making the plugin to your Neovim configuration available might not always be enough. In that
+Just making the plugin to your Neovim configuration available might not always
-case, you can write custom lua config using either `config.vim.lazy.plugins.*.setupOpts`
+be enough. In that case, you can write custom lua config using either
-`config.vim.extraPlugins.*.setup` or `config.vim.luaConfigRC`. 
+`config.vim.lazy.plugins.*.setupOpts` `config.vim.extraPlugins.*.setup` or
+`config.vim.luaConfigRC`.
 
-The first option uses an extended version of `lz.n`'s PluginSpec. `setupModule` and `setupOpt` can
+The first option uses an extended version of `lz.n`'s PluginSpec. `setupModule`
-be used if the plugin uses a `require('module').setup(...)` pattern. Otherwise, the `before` and
+and `setupOpt` can be used if the plugin uses a `require('module').setup(...)`
-`after` hooks should do what you need.
+pattern. Otherwise, the `before` and `after` hooks should do what you need.
 
 ```nix
 {
@@ -24,10 +25,11 @@ be used if the plugin uses a `require('module').setup(...)` pattern. Otherwise,
 }
 ```
 
-The second option uses an attribute set, which maps DAG section names to a custom type, which has
+The second option uses an attribute set, which maps DAG section names to a
-the fields `package`, `after`, `setup`. They allow you to set the package of the plugin, the
+custom type, which has the fields `package`, `after`, `setup`. They allow you to
-sections its setup code should be after (note that the `extraPlugins` option has its own DAG
+set the package of the plugin, the sections its setup code should be after (note
-scope), and the its setup code respectively. For example:
+that the `extraPlugins` option has its own DAG scope), and the its setup code
+respectively. For example:
 
 ```nix
 config.vim.extraPlugins = with pkgs.vimPlugins; {
@@ -56,13 +58,17 @@ For example:
 }
 ```
 
+<!-- deno-fmt-ignore-start -->
+
 ::: {.note}
-If your configuration needs to be put in a specific place in the config, you
+One of the greatest strengths of nvf is the ability to order
-can use functions from `inputs.nvf.lib.nvim.dag` to order it. Refer to
+snippets of configuration via the DAG system. It will allow specifying positions
-https://github.com/nix-community/home-manager/blob/master/modules/lib/dag.nix
+of individual sections of configuration as needed. nvf provides helper functions
+in the extended library, usually under `inputs.nvf.lib.nvim.dag` that you may
+use.
+
+Please refer to the [DAG section](/index.xhtml#ch-dag-entries) in the nvf manual
 to find out more about the DAG system.
 :::
 
-If you successfully made your plugin work, please feel free to create a PR to
+<!-- deno-fmt-ignore-end -->
-add it to **nvf** or open an issue with your findings so that we can make it
-available for everyone easily.

docs/manual/configuring/custom-plugins/legacy-method.md

@@ -1,6 +1,6 @@
 # Legacy Method {#sec-legacy-method}
 
-Prior to version 0.5, the method of adding new plugins was adding the plugin
+Prior to version v0.5, the method of adding new plugins was adding the plugin
 package to `vim.startPlugins` and add its configuration as a DAG under one of
 `vim.configRC` or `vim.luaConfigRC`. Users who have not yet updated to 0.5, or
 prefer a more hands-on approach may use the old method where the load order of
@@ -8,13 +8,14 @@ the plugins is determined by DAGs.
 
 ## Adding plugins {#sec-adding-plugins}
 
-To add a plugin to **nvf**'s runtime, you may add it
+To add a plugin not available in nvf as a module to your configuration, you may
+add it to [](#opt-vim.startPlugins) in order to make it available to Neovim at
+runtime.
 
 ```nix
 {pkgs, ...}: {
-  # add a package from nixpkgs to startPlugins
+  # Add a Neovim plugin from Nixpkgs to the runtime.
-  vim.startPlugins = [
+  vim.startPlugins = [pkgs.vimPlugins.aerial-nvim];
-    pkgs.vimPlugins.aerial-nvim  ];
 }
 ```
 
@@ -23,7 +24,9 @@ provide configuration as a DAG using the **nvf** extended library.
 
 ```nix
 {inputs, ...}: let
-  # assuming you have an input called nvf pointing at the nvf repository
+  # This assumes you have an input called 'nvf' in your flake inputs
+  # and 'inputs' in your specialArgs. In the case you have passed 'nvf'
+  # to specialArgs, the 'inputs' prefix may be omitted.
   inherit (inputs.nvf.lib.nvim.dag) entryAnywhere;
 in {
   vim.luaConfigRC.aerial-nvim= entryAnywhere ''

docs/manual/hacking.md

@@ -1,16 +1,25 @@
 # Hacking nvf {#ch-hacking}
 
-**nvf** is designed for developers as much as it is for the end user. I would like any potential contributor
+[open issues]: https://github.com/notashelf/nvf/issues
-to be able to propagate their desired changes into the repository without the extra effort. As such, below are guides
+[new issue]: https://github.com/notashelf/nvf/issues/new
-(and guidelines) to streamline the contribution process and ensure that your valuable input seamlessly integrates
-into **nvf**'s development without leaving question marks in your head.
 
-This section is mainly directed towards those who wish to contribute code into **nvf**. If you wish to instead
+nvf is designed for the developer as much as it is designed for the end-user. We
-report a bug or discuss a potential feature implementation, first look among the
+would like for any contributor to be able to propagate their changes, or add new
-already [open issues](https://github.com/notashelf/nvf/issues) and if no matching issue exists you may open
+features to the project with minimum possible friction. As such, below are the
-a [new issue](https://github.com/notashelf/nvf/issues/new) and describe your problem/request. While creating an
+guides and guidelines written to streamline the contribution process and to
-issue, please try to include as much information as you can, ideally also include relevant context in which an issue
+ensure that your valuable input integrates into nvf's development as seamlessly
-occurs or a feature should be implemented.
+as possible without leaving any question marks in your head.
+
+This section is directed mainly towards those who wish to contribute code into
+the project. If you instead wish to report a bug, or discuss a potential new
+feature implementation (which you do not wish to implement yourself) first look
+among the already [open issues] and if no matching issue exists you may open a
+[new issue] and describe your problem/request.
+
+While creating an issue, please try to include as much information as you can,
+ideally also include relevant context in which an issue occurs or a feature
+should be implemented. If you wish to make a contribution, but feel stuck -
+please do not be afraid to submit a pull request, we will help you get it in.
 
 ```{=include=} sections
 hacking/getting-started.md

docs/manual/installation.md

@@ -1,9 +1,12 @@
 # Installing nvf {#ch-installation}
 
+[module installation section]: #ch-module-installation
+
 There are multiple ways of installing nvf on your system. You may either choose
-the standalone installation method, which does not depend on a module system and may
+the standalone installation method, which does not depend on a module system and
-be done on any system that has the Nix package manager or the appropriate modules
+may be done on any system that has the Nix package manager or the appropriate
-for NixOS and home-manager as described in the [module installation section](#ch-module-installation)
+modules for NixOS and home-manager as described in the
+[module installation section].
 
 ```{=include=} chapters
 installation/custom-configuration.md

docs/manual/manual.md

@@ -17,8 +17,8 @@ configuring.md
 hacking.md
 ```
 
-```{=include=} appendix html:into-file=//plugins.html
+```{=include=} appendix html:into-file=//quirks.html
-plugins.md
+quirks.md
 ```
 
 ```{=include=} appendix html:into-file=//options.html

docs/manual/options.md

@@ -1,8 +1,14 @@
 # Neovim Flake Configuration Options {#ch-options}
 
-Below are the options provided by nvf provided in no particular order.
+Below are the module options provided by nvf, in no particular order. Most
-They may include useful comments and warnings, or examples on how a module option
+options will include useful comments, warnings or setup tips on how a module
-is meant to be used.
+option is meant to be used as well as examples in complex cases.
+
+<!--
+In the manual, individual options may be referenced in Hyperlinks as follows:
+[](#opt-vim.*) If changing the prefix here, do keep in mind the #opt- suffix will have
+to be changed everywhere.
+-->
 
 ```{=include=} options
 id-prefix: opt-

docs/manual/plugins.md

@@ -1,16 +0,0 @@
-# Plugin specific quirks {#ch-plugins}
-
-At times, certain plugins refuse to play nicely. Be it as a result of generating
-lua from Nix, or the state of packaging. This page shall list any plugins that
-are known to misbehave, and potential workarounds.
-
-```{=include=} chapters
-plugins/nodejs.md
-```
-<!--
-If adding a new section, uncomment this part and add your page to
-plugins/<page>.md
-```{=include=} chapters
-plugins/page.md
-```
--->

docs/manual/preface.md

@@ -1,7 +1,20 @@
 # Preface {#ch-preface}
 
-If you noticed a bug caused by **nvf** then please consider reporting it over
+## What is nvf {#sec-what-is-it}
-[the issue tracker](https://github.com/notashelf/nvf/issues).
 
-Bugfixes, feature additions and upstreamed changes from your local configurations
+nvf is a highly modular, configurable, extensible and easy to use Neovim
-are always welcome in the [the pull requests tab](https://github.com/notashelf/nvf/pulls).
+configuration in Nix. Designed for flexibility and ease of use, nvf allows you
+to easily configure your fully featured Neovim instance with a few lines of Nix.
+
+## Bugs & Suggestions {#sec-bugs-suggestions}
+
+[issue tracker]: https://github.com/notashelf/nvf/issues
+[discussions tab]: https://github.com/notashelf/nvf/discussions
+[pull requests tab]: https://github.com/notashelf/nvf/pulls
+
+If you notice any issues with nvf, or this documentation, then please consider
+reporting them over at the [issue tracker]. Issues tab, in addition to the
+[discussions tab] is a good place as any to request new features.
+
+You may also consider submitting bugfixes, feature additions and upstreamed
+changes that you think are critical over at the [pull requests tab].

docs/manual/quirks.md

@@ -0,0 +1,13 @@
+# Known Issues and Quirks {#ch-known-issues-quirks}
+
+At times, certain plugins and modules may refuse to play nicely with your setup,
+be it a result of generating Lua from Nix, or the state of packaging. This page,
+in turn, will list any known modules or plugins that are known to misbehave, and
+possible workarounds that you may apply.
+
+<!-- If adding a new known quirk, please create a new page in quirks/ and include
+the name of the file here.-->
+
+```{=include=} chapters
+quirks/nodejs.md
+```

docs/manual/quirks/nodejs.md

@@ -1,16 +1,22 @@
-# NodeJS {#ch-plugins-nodejs}
+# NodeJS {#ch-quirks-nodejs}
 
 ## eslint-plugin-prettier {#sec-eslint-plugin-prettier}
 
-When working with NodeJS, everything works as expected, but some projects have settings that can fool nvf.
+When working with NodeJS, everything works as expected, but some projects have
+settings that can fool nvf.
 
-If [this plugin](https://github.com/prettier/eslint-plugin-prettier) or similar is included, you might get a situation where your eslint configuration diagnoses your formatting according to its own config (usually `.eslintrc.js`).
+If [this plugin](https://github.com/prettier/eslint-plugin-prettier) or similar
+is included, you might get a situation where your eslint configuration diagnoses
+your formatting according to its own config (usually `.eslintrc.js`).
 
 The issue there is your formatting is made via prettierd.
 
-This results in auto-formating relying on your prettier config, while your eslint config diagnoses formatting [which it's not supposed to](https://prettier.io/docs/en/comparison.html))
+This results in auto-formating relying on your prettier config, while your
+eslint config diagnoses formatting
+[which it's not supposed to](https://prettier.io/docs/en/comparison.html))
 
-In the end, you get discrepancies between what your editor does and what it wants.
+In the end, you get discrepancies between what your editor does and what it
+wants.
 
 Solutions are:
 

docs/manual/try-it-out.md

@@ -1,25 +1,27 @@
 # Try it out {#ch-try-it-out}
 
-Thanks to the portability of Nix, you can try out nvf without actually installing it to your machine.
+Thanks to the portability of Nix, you can try out nvf without actually
-Below are the commands you may run to try out different configurations provided by this flake. As of v0.5, three
+installing it to your machine. Below are the commands you may run to try out
+different configurations provided by this flake. As of v0.5, two specialized
 configurations are provided:
 
-- Nix
+- **Nix** - Nix language server + simple utility plugins
-- Maximal
+- **Maximal** - Variable language servers + utility and decorative plugins
 
-You may try out any of the provided configurations using the `nix run` command on a system where Nix is installed.
+You may try out any of the provided configurations using the `nix run` command
+on a system where Nix is installed.
 
-```console
+```bash
 $ cachix use nvf                   # Optional: it'll save you CPU resources and time
 $ nix run github:notashelf/nvf#nix # will run the default minimal configuration
 ```
 
-Do keep in mind that this is **susceptible to garbage collection** meaning it will be removed from your Nix store
+Do keep in mind that this is **susceptible to garbage collection** meaning it
-once you garbage collect.
+will be removed from your Nix store once you garbage collect.
 
-## Using Prebuilt Configs {#sec-using-prebuild-configs}
+## Using Prebuilt Configs {#sec-using-prebuilt-configs}
 
-```console
+```bash
 $ nix run github:notashelf/nvf#nix
 $ nix run github:notashelf/nvf#maximal
 ```
@@ -28,12 +30,19 @@ $ nix run github:notashelf/nvf#maximal
 
 #### Nix {#sec-configs-nix}
 
-`Nix` configuration by default provides LSP/diagnostic support for Nix alongisde a set of visual and functional plugins.
+`Nix` configuration by default provides LSP/diagnostic support for Nix alongside
-By running `nix run .#`, which is the default package, you will build Neovim with this config.
+a set of visual and functional plugins. By running `nix run .#`, which is the
+default package, you will build Neovim with this config.
 
 #### Maximal {#sec-configs-maximal}
 
-`Maximal` is the ultimate configuration that will enable support for more commonly used language as well as additional
+`Maximal` is the ultimate configuration that will enable support for more
-complementary plugins. Keep in mind, however, that this will pull a lot of dependencies.
+commonly used language as well as additional complementary plugins. Keep in
+mind, however, that this will pull a lot of dependencies.
 
-You are _strongly_ recommended to use the binary cache if you would like to try the Maximal configuration.
+::: {.tip}
+
+You are _strongly_ recommended to use the binary cache if you would like to try
+the Maximal configuration.
+
+:::

release.json

@@ -1,4 +1,4 @@
 {
-	"release": "v0.6",
+	"release": "v0.7",
-	"isReleaseBranch": true
+	"isReleaseBranch": false
 }